threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
36 lines
900 B
Plaintext
36 lines
900 B
Plaintext
ARC PGU
|
|
|
|
This is a display controller found on several development boards produced
|
|
by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
|
|
framebuffer and sends it to a single digital encoder (usually HDMI).
|
|
|
|
Required properties:
|
|
- compatible: "snps,arcpgu"
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- clocks: A list of phandle + clock-specifier pairs, one for each
|
|
entry in 'clock-names'.
|
|
- clock-names: A list of clock names. For ARC PGU it should contain:
|
|
- "pxlclk" for the clock feeding the output PLL of the controller.
|
|
|
|
Required sub-nodes:
|
|
- port: The PGU connection to an encoder chip.
|
|
|
|
Example:
|
|
|
|
/ {
|
|
...
|
|
|
|
pgu@XXXXXXXX {
|
|
compatible = "snps,arcpgu";
|
|
reg = <0xXXXXXXXX 0x400>;
|
|
clocks = <&clock_node>;
|
|
clock-names = "pxlclk";
|
|
|
|
port {
|
|
pgu_output: endpoint {
|
|
remote-endpoint = <&hdmi_enc_input>;
|
|
};
|
|
};
|
|
};
|
|
};
|