threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
32 lines
860 B
Plaintext
32 lines
860 B
Plaintext
Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
|
|
Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
|
|
|
|
Required properties:
|
|
- compatible: should be one of:
|
|
"samsung,s6e3ha2",
|
|
"samsung,s6e3hf2".
|
|
- reg: the virtual channel number of a DSI peripheral
|
|
- vdd3-supply: I/O voltage supply
|
|
- vci-supply: voltage supply for analog circuits
|
|
- reset-gpios: a GPIO spec for the reset pin (active low)
|
|
- enable-gpios: a GPIO spec for the panel enable pin (active high)
|
|
|
|
Optional properties:
|
|
- te-gpios: a GPIO spec for the tearing effect synchronization signal
|
|
gpio pin (active high)
|
|
|
|
Example:
|
|
&dsi {
|
|
...
|
|
|
|
panel@0 {
|
|
compatible = "samsung,s6e3ha2";
|
|
reg = <0>;
|
|
vdd3-supply = <&ldo27_reg>;
|
|
vci-supply = <&ldo28_reg>;
|
|
reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
|
|
enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
|
|
te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|