threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
30 lines
961 B
Plaintext
30 lines
961 B
Plaintext
* Freescale 8xxx/3.0 Gb/s SATA nodes
|
|
|
|
SATA nodes are defined to describe on-chip Serial ATA controllers.
|
|
Each SATA port should have its own node.
|
|
|
|
Required properties:
|
|
- compatible : compatible list, contains 2 entries, first is
|
|
"fsl,CHIP-sata", where CHIP is the processor
|
|
(mpc8315, mpc8379, etc.) and the second is
|
|
"fsl,pq-sata"
|
|
- interrupts : <interrupt mapping for SATA IRQ>
|
|
- cell-index : controller index.
|
|
1 for controller @ 0x18000
|
|
2 for controller @ 0x19000
|
|
3 for controller @ 0x1a000
|
|
4 for controller @ 0x1b000
|
|
|
|
Optional properties:
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
- reg : <registers mapping>
|
|
|
|
Example:
|
|
sata@18000 {
|
|
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
|
|
reg = <0x18000 0x1000>;
|
|
cell-index = <1>;
|
|
interrupts = <2c 8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|