/*
 * Copyright (C) 2015 MediaTek Inc.
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 */

#ifdef USE_SSUSB_QMU
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>

#include "musb_core.h"
#include "mu3d_hal_osal.h"
#include "mu3d_hal_qmu_drv.h"
#include "mu3d_hal_hw.h"
#include "ssusb_qmu.h"

/* Sanity CR check in */
/*
 *   1. Find the last gpd HW has executed and update Tx_gpd_last[]
 *   2. Set the flag for txstate to know that TX has been completed
 *
 *   ported from proc_qmu_tx() from test driver.
 *
 *   caller:qmu_interrupt after getting QMU done interrupt and TX is raised
*/
void qmu_done_tx(struct musb *musb, u8 ep_num, unsigned long flags)
{
	struct TGPD *gpd = Tx_gpd_last[ep_num];
	/* QMU GPD address --> CPU DMA address */
	struct TGPD *gpd_current = (struct TGPD *) (uintptr_t) (os_readl(USB_QMU_TQCPR(ep_num)));
	struct musb_ep *musb_ep = &musb->endpoints[ep_num].ep_in;
	struct usb_request *request = NULL;
	struct musb_request *req = NULL;
	static DEFINE_RATELIMIT_STATE(ratelimit_tx, 1 * HZ, 3);

	/*Transfer PHY addr got from QMU register to VIR addr */
	gpd_current = gpd_phys_to_virt((void *)gpd_current, USB_TX, ep_num);

	/*
	 *  gpd or Last       gdp_current
	 *  |                  |
	 *  |->  GPD1 --> GPD2 --> GPD3 --> GPD4 --> GPD5 -|
	 *  |----------------------------------------------|
	 */

	qmu_printk(K_DEBUG, "[TXD] %s EP %d, Last=%p, Current=%p, End=%p\n",
		   __func__, ep_num, gpd, gpd_current, Tx_gpd_end[ep_num]);

	/*gpd_current should at least point to the next GPD to the previous last one. */
	if (gpd == gpd_current) {
		if (__ratelimit(&ratelimit_tx))
			qmu_printk(K_ERR, "[TXD] %s gpd(%p) == gpd_current(%p)\n", __func__, gpd,
			   gpd_current);
		return;
	}

	if (TGPD_IS_FLAGS_HWO(gpd)) {
		qmu_printk(K_DEBUG, "[TXD] %s HWO=1, CPR=%x\n", __func__,
			   os_readl(USB_QMU_TQCPR(ep_num)));
		WARN_ON(1);
	}

	while (gpd != gpd_current && !TGPD_IS_FLAGS_HWO(gpd)) {
#if defined(CONFIG_USB_MU3D_DRV_36BIT)
		qmu_printk(K_DEBUG,
			"[TXD] gpd=%p ->HWO=%d, BPD=%d, Next_GPD=%lx, DataBuffer=%lx,BufferLen=%d request=%p\n",
			gpd, (u32) TGPD_GET_FLAG(gpd),
			(u32) TGPD_GET_FORMAT(gpd), (uintptr_t) TGPD_GET_NEXT_TX(gpd),
			(uintptr_t) TGPD_GET_DATA_TX(gpd), (u32) TGPD_GET_BUF_LEN(gpd), req);

		if (!TGPD_GET_NEXT_TX(gpd)) {
			qmu_printk(K_ERR, "[TXD][ERROR] Next GPD is null!!\n");
			/* BUG_ON(1); */
			break;
		}

		gpd = TGPD_GET_NEXT_TX(gpd);

#else
		qmu_printk(K_DEBUG,
			"[TXD] gpd=%p ->HWO=%d, BPD=%d, Next_GPD=%lx, DataBuffer=%lx,BufferLen=%d request=%p\n",
			gpd, (u32) TGPD_GET_FLAG(gpd),
			(u32) TGPD_GET_FORMAT(gpd), (uintptr_t) TGPD_GET_NEXT(gpd),
			(uintptr_t) TGPD_GET_DATA(gpd), (u32) TGPD_GET_BUF_LEN(gpd), req);

		if (!TGPD_GET_NEXT(gpd)) {
			qmu_printk(K_ERR, "[TXD][ERROR] Next GPD is null!!\n");
			/* BUG_ON(1); */
			break;
		}

		gpd = TGPD_GET_NEXT(gpd);

#endif

		gpd = gpd_phys_to_virt(gpd, USB_TX, ep_num);

		/* trying to give_back the request to gadget driver. */
		req = next_request(musb_ep);
		if (!req) {
			qmu_printk(K_INFO, "[TXD] %s Cannot get next request of %d, but QMU has done.\n",
				   __func__, ep_num);
			return;
		}

		request = &req->request;

		Tx_gpd_last[ep_num] = gpd;
		musb_g_giveback(musb_ep, request, 0);
		req = next_request(musb_ep);
		if (req != NULL)
			request = &req->request;
	}

	if (gpd != gpd_current && TGPD_IS_FLAGS_HWO(gpd)) {
		qmu_printk(K_ERR, "[TXD][ERROR] EP%d TQCSR=%x, TQSAR=%x, TQCPR=%x\n",
			   ep_num, os_readl(USB_QMU_TQCSR(ep_num)), os_readl(USB_QMU_TQSAR(ep_num)),
			   os_readl(USB_QMU_TQCPR(ep_num)));

		qmu_printk(K_ERR, "[TXD][ERROR] QCR0=%x, QCR1=%x, QCR2=%x, QCR3=%x, QGCSR=%x\n",
			   os_readl(U3D_QCR0), os_readl(U3D_QCR1), os_readl(U3D_QCR2),
			   os_readl(U3D_QCR3), os_readl(U3D_QGCSR));
#if defined(CONFIG_USB_MU3D_DRV_36BIT)
		qmu_printk(K_ERR, "[TXD][ERROR] HWO=%d, BPD=%d, Next_GPD=%lx\n",
			   (u32) TGPD_GET_FLAG(gpd),
			   (u32) TGPD_GET_FORMAT(gpd), (uintptr_t) TGPD_GET_NEXT_TX(gpd));

		qmu_printk(K_ERR, "[TXD][ERROR] DataBuffer=%lx, BufferLen=%d, Endpoint=%d\n",
			   (uintptr_t) TGPD_GET_DATA_TX(gpd), (u32) TGPD_GET_BUF_LEN(gpd),
			   (u32) TGPD_GET_EPaddr(gpd));
#else
		qmu_printk(K_ERR, "[TXD][ERROR] HWO=%d, BPD=%d, Next_GPD=%lx\n",
			   (u32) TGPD_GET_FLAG(gpd),
			   (u32) TGPD_GET_FORMAT(gpd), (uintptr_t) TGPD_GET_NEXT(gpd));

		qmu_printk(K_ERR, "[TXD][ERROR] DataBuffer=%lx, BufferLen=%d, Endpoint=%d\n",
			   (uintptr_t) TGPD_GET_DATA(gpd), (u32) TGPD_GET_BUF_LEN(gpd),
			   (u32) TGPD_GET_EPaddr(gpd));
#endif
	}

	qmu_printk(K_DEBUG, "[TXD] %s EP%d, Last=%p, End=%p, complete\n", __func__,
		   ep_num, Tx_gpd_last[ep_num], Tx_gpd_end[ep_num]);

	if (req != NULL) {
		if (request->length == 0) {
			u32 val = 0;

			qmu_printk(K_DEBUG, "[TXD] ==Send ZLP== %p\n", req);

			if (wait_for_value_us
			    (USB_END_OFFSET(req->epnum, U3D_TX1CSR0), TX_FIFOEMPTY, TX_FIFOEMPTY, 1,
			     10) == RET_SUCCESS)
				qmu_printk(K_DEBUG, "Tx[%d] 0x%x\n", req->epnum,
					   USB_ReadCsr32(U3D_TX1CSR0, req->epnum));
			else {
				qmu_printk(K_CRIT, "Tx[%d] NOT FIFOEMPTY 0x%x\n", req->epnum,
					   USB_ReadCsr32(U3D_TX1CSR0, req->epnum));
				return;
			}

			/*Disable Tx_DMAREQEN */
			val = USB_ReadCsr32(U3D_TX1CSR0, req->epnum) & ~TX_DMAREQEN;

			mb();	/* avoid context swtich */

			USB_WriteCsr32(U3D_TX1CSR0, req->epnum, val);

			val = USB_ReadCsr32(U3D_TX1CSR0, req->epnum) | TX_TXPKTRDY;

			mb();	/* avoid context swtich */

			USB_WriteCsr32(U3D_TX1CSR0, req->epnum, val);

			qmu_printk(K_DEBUG,
				   "[TXD] Giveback ZLP of EP%d, actual:%d, length:%d %p\n",
				   req->epnum, request->actual, request->length, request);

			musb_g_giveback(musb_ep, request, 0);
		}
	}
}

/*
 *   When receiving RXQ done interrupt, qmu_interrupt calls this function.
 *
 *  1. Traverse GPD/BD data structures to count actual transferred length.
 *  2. Set the done flag to notify rxstate_qmu() to report status to upper gadget driver.
 *
 *   ported from proc_qmu_rx() from test driver.
 *
 *   caller:qmu_interrupt after getting QMU done interrupt and TX is raised
 *
*/
void qmu_done_rx(struct musb *musb, u8 ep_num, unsigned long flags)
{
	struct TGPD *gpd = Rx_gpd_last[ep_num];
	/* QMU GPD address --> CPU DMA address */
	struct TGPD *gpd_current = (struct TGPD *) (uintptr_t) (os_readl(USB_QMU_RQCPR(ep_num)));
	struct musb_ep *musb_ep = &musb->endpoints[ep_num].ep_out;
	struct usb_request *request = NULL;
	struct musb_request *req;
	static DEFINE_RATELIMIT_STATE(ratelimit_rx, 1 * HZ, 3);

	/* trying to give_back the request to gadget driver. */
	req = next_request(musb_ep);
	if (!req) {
		qmu_printk(K_ERR, "[RXD] %s Cannot get next request of %d, but QMU has done.\n",
			   __func__, ep_num);
		return;
	}

	request = &req->request;

	/*Transfer PHY addr got from QMU register to VIR addr */
	gpd_current = gpd_phys_to_virt(gpd_current, USB_RX, ep_num);

	qmu_printk(K_DEBUG, "[RXD] %s EP%d, Last=%p, Current=%p, End=%p\n",
		   __func__, ep_num, gpd, gpd_current, Rx_gpd_end[ep_num]);

	/*gpd_current should at least point to the next GPD to the previous last one. */
	if (gpd == gpd_current) {
		if (__ratelimit(&ratelimit_rx)) {
			qmu_printk(K_ERR, "[RXD][ERROR] %s gpd(%p) == gpd_current(%p)\n", __func__, gpd,
				   gpd_current);
			qmu_printk(K_ERR, "[RXD][ERROR] EP%d RQCSR=%x, RQSAR=%x, RQCPR=%x, RQLDPR=%x\n",
				   ep_num, os_readl(USB_QMU_RQCSR(ep_num)), os_readl(USB_QMU_RQSAR(ep_num)),
				   os_readl(USB_QMU_RQCPR(ep_num)), os_readl(USB_QMU_RQLDPR(ep_num)));
			qmu_printk(K_ERR, "[RXD][ERROR] QCR0=%x, QCR1=%x, QCR2=%x, QCR3=%x, QGCSR=%x\n",
				   os_readl(U3D_QCR0), os_readl(U3D_QCR1), os_readl(U3D_QCR2),
				   os_readl(U3D_QCR3), os_readl(U3D_QGCSR));
#if defined(CONFIG_USB_MU3D_DRV_36BIT)
		qmu_printk(K_INFO, "[RXD][ERROR] HWO=%d, Next_GPD=%lx ,DataBufLen=%d, DataBuf=%lx\n",
			   (u32) TGPD_GET_FLAG(gpd), (uintptr_t) TGPD_GET_NEXT_RX(gpd),
			   (u32) TGPD_GET_DataBUF_LEN(gpd), (uintptr_t) TGPD_GET_DATA_RX(gpd));
#else
			qmu_printk(K_INFO, "[RXD][ERROR] HWO=%d, Next_GPD=%lx ,DataBufLen=%d, DataBuf=%lx\n",
				   (u32) TGPD_GET_FLAG(gpd), (uintptr_t) TGPD_GET_NEXT(gpd),
				   (u32) TGPD_GET_DataBUF_LEN(gpd), (uintptr_t) TGPD_GET_DATA(gpd));
#endif
			qmu_printk(K_INFO, "[RXD][ERROR] RecvLen=%d, Endpoint=%d\n",
				   (u32) TGPD_GET_BUF_LEN(gpd), (u32) TGPD_GET_EPaddr(gpd));
		}
		return;
	}

	if (!gpd || !gpd_current) {
		qmu_printk(K_ERR,
		   "[RXD][ERROR] %s EP%d, gpd=%p, gpd_current=%p, ishwo=%d, rx_gpd_last=%p, RQCPR=0x%x\n",
		   __func__, ep_num, gpd, gpd_current,
		   ((gpd == NULL) ? 999 : TGPD_IS_FLAGS_HWO(gpd)),
		   Rx_gpd_last[ep_num],
		   os_readl(USB_QMU_RQCPR(ep_num)));
		return;
	}

	if (TGPD_IS_FLAGS_HWO(gpd)) {
		qmu_printk(K_ERR, "[RXD][ERROR] HWO=1!!\n");
		WARN_ON(1);
		goto exit;
	}

	while (gpd != gpd_current && !TGPD_IS_FLAGS_HWO(gpd)) {
		unsigned int rcv_len = (unsigned int) TGPD_GET_BUF_LEN(gpd);
		unsigned int buf_len = (unsigned int) TGPD_GET_DataBUF_LEN(gpd);

		if (rcv_len > buf_len)
			qmu_printk(K_ERR, "[RXD][ERROR] %s rcv(%d) > buf(%d) AUK!?\n", __func__,
				   rcv_len, buf_len);
#if defined(CONFIG_USB_MU3D_DRV_36BIT)
		qmu_printk(K_DEBUG,
			   "[RXD] gpd=%p ->HWO=%d, Next_GPD=%p, RcvLen=%d, BufLen=%d, pBuf=%p\n",
			   gpd, TGPD_GET_FLAG(gpd), TGPD_GET_NEXT_RX(gpd), rcv_len, buf_len,
			   TGPD_GET_DATA_RX(gpd));
#else
		qmu_printk(K_DEBUG,
			   "[RXD] gpd=%p ->HWO=%d, Next_GPD=%p, RcvLen=%d, BufLen=%d, pBuf=%p\n",
			   gpd, TGPD_GET_FLAG(gpd), TGPD_GET_NEXT(gpd), rcv_len, buf_len,
			   TGPD_GET_DATA(gpd));
#endif
#if defined(CONFIG_USB_MU3D_DRV_36BIT)
		if (!TGPD_GET_NEXT_RX(gpd) || !TGPD_GET_DATA_RX(gpd)) {
			qmu_printk(K_WARNIN, "[RXD][WARN] %s EP%d ,gpd=%p\n", __func__, ep_num,
				   gpd);
			goto exit;
		}

		gpd = TGPD_GET_NEXT_RX(gpd);
#else
		if (!TGPD_GET_NEXT(gpd) || !TGPD_GET_DATA(gpd)) {
			qmu_printk(K_WARNIN, "[RXD][WARN] %s EP%d ,gpd=%p\n", __func__, ep_num,
				   gpd);
			goto exit;
		}

		gpd = TGPD_GET_NEXT(gpd);
#endif
		gpd = gpd_phys_to_virt(gpd, USB_RX, ep_num);

		if (!gpd) {
			qmu_printk(K_ERR, "[RXD][ERROR] %s EP%d ,gpd=%p\n", __func__, ep_num,
				   gpd);
			WARN_ON(1);
			goto exit;
		}

		request->actual += rcv_len;
		Rx_gpd_last[ep_num] = gpd;
		musb_g_giveback(musb_ep, request, 0);
		req = next_request(musb_ep);
		request = &req->request;
	}

	if (gpd != gpd_current && TGPD_IS_FLAGS_HWO(gpd)) {
		qmu_printk(K_ERR, "[RXD][ERROR] gpd=%p\n", gpd);

		qmu_printk(K_ERR, "[RXD][ERROR] EP%d RQCSR=%x, RQSAR=%x, RQCPR=%x, RQLDPR=%x\n",
			   ep_num, os_readl(USB_QMU_RQCSR(ep_num)), os_readl(USB_QMU_RQSAR(ep_num)),
			   os_readl(USB_QMU_RQCPR(ep_num)), os_readl(USB_QMU_RQLDPR(ep_num)));

		qmu_printk(K_ERR, "[RXD][ERROR] QCR0=%x, QCR1=%x, QCR2=%x, QCR3=%x, QGCSR=%x\n",
			   os_readl(U3D_QCR0), os_readl(U3D_QCR1), os_readl(U3D_QCR2),
			   os_readl(U3D_QCR3), os_readl(U3D_QGCSR));
#if defined(CONFIG_USB_MU3D_DRV_36BIT)
		qmu_printk(K_INFO, "[RXD][ERROR] HWO=%d, Next_GPD=%lx ,DataBufLen=%d, DataBuf=%lx\n",
			   (u32) TGPD_GET_FLAG(gpd), (uintptr_t) TGPD_GET_NEXT_RX(gpd),
			   (u32) TGPD_GET_DataBUF_LEN(gpd), (uintptr_t) TGPD_GET_DATA_RX(gpd));
#else
		qmu_printk(K_INFO, "[RXD][ERROR] HWO=%d, Next_GPD=%lx ,DataBufLen=%d, DataBuf=%lx\n",
			   (u32) TGPD_GET_FLAG(gpd), (uintptr_t) TGPD_GET_NEXT(gpd),
			   (u32) TGPD_GET_DataBUF_LEN(gpd), (uintptr_t) TGPD_GET_DATA(gpd));

#endif
		qmu_printk(K_INFO, "[RXD][ERROR] RecvLen=%d, Endpoint=%d\n",
			   (u32) TGPD_GET_BUF_LEN(gpd), (u32) TGPD_GET_EPaddr(gpd));
	}
exit:
	qmu_printk(K_DEBUG, "[RXD] %s EP%d, Last=%p, End=%p, complete\n", __func__,
		   ep_num, Rx_gpd_last[ep_num], Rx_gpd_end[ep_num]);
}

void qmu_done_tasklet(unsigned long data)
{
	unsigned int qmu_val;
	unsigned int i;
	unsigned long flags;
	struct musb *musb = (struct musb *)data;

	spin_lock_irqsave(&musb->lock, flags);

	qmu_val = musb->qmu_done_intr;

	musb->qmu_done_intr = 0;

	for (i = 1; i <= MAX_QMU_EP; i++) {
		if (qmu_val & QMU_RX_DONE(i))
			qmu_done_rx(musb, i, flags);
		if (qmu_val & QMU_TX_DONE(i))
			qmu_done_tx(musb, i, flags);
	}
	spin_unlock_irqrestore(&musb->lock, flags);
}

void qmu_error_recovery(unsigned long data)
{
#ifdef USE_SSUSB_QMU
	u8 ep_num;
	enum USB_DIR dir;
	unsigned long flags;
	struct musb *musb = (struct musb *)data;
	struct musb_ep *musb_ep;
	struct musb_request *request;
	bool is_len_err = false;
	int i = 0;

	spin_lock_irqsave(&musb->lock, flags);
	ep_num = 0;
	if ((musb->error_wQmuVal & RXQ_CSERR_INT) || (musb->error_wQmuVal & RXQ_LENERR_INT)) {
		dir = USB_RX;
		for (i = 1; i <= MAX_QMU_EP; i++) {
			if (musb->error_wErrVal & QMU_RX_CS_ERR(i)) {
				qmu_printk(K_ERR, "mu3d_hal_resume_qmu Rx %d checksum error!\r\n",
					   i);
				ep_num = i;
				break;
			}

			if (musb->error_wErrVal & QMU_RX_LEN_ERR(i)) {
				qmu_printk(K_ERR, "mu3d_hal_resume_qmu RX EP%d Recv Length error\n",
					   i);
				ep_num = i;
				is_len_err = true;
				break;
			}
		}
	} else if ((musb->error_wQmuVal & TXQ_CSERR_INT) || (musb->error_wQmuVal & TXQ_LENERR_INT)) {
		dir = USB_TX;
		for (i = 1; i <= MAX_QMU_EP; i++) {
			if (musb->error_wErrVal & QMU_TX_CS_ERR(i)) {
				qmu_printk(K_ERR, "mu3d_hal_resume_qmu Tx %d checksum error!\r\n",
					   i);
				ep_num = i;
				break;
			}

			if (musb->error_wErrVal & QMU_TX_LEN_ERR(i)) {
				qmu_printk(K_ERR, "mu3d_hal_resume_qmu TX EP%d Recv Length error\n",
					   i);
				ep_num = i;
				is_len_err = true;
				break;
			}
		}
	}

	if (ep_num == 0) {
		qmu_printk(K_ERR, "Error but ep_num == 0!\r\n");
		goto done;
	}

	_ex_mu3d_hal_flush_qmu(ep_num, dir);
	/* mu3d_hal_restart_qmu(ep_num, dir); */

	if (dir == USB_TX)
		musb_ep = &musb->endpoints[ep_num].ep_in;
	else
		musb_ep = &musb->endpoints[ep_num].ep_out;

	list_for_each_entry(request, &musb_ep->req_list, list) {
		qmu_printk(K_ERR, "%s : request 0x%p length(%d)\n", __func__, request,
			   request->request.length);

		if (request->request.dma != DMA_ADDR_INVALID) {
			if (request->tx) {
				qmu_printk(K_ERR, "[TX] %s gpd=%p, epnum=%d, len=%d\n", __func__,
					   Tx_gpd_end[ep_num], ep_num, request->request.length);
				request->request.actual = request->request.length;
				if (request->request.length > 0) {
					u32 txcsr;

					if (is_len_err == true) {
						_ex_mu3d_hal_insert_transfer_gpd(request->epnum,
										 USB_TX,
										 request->
										 request.dma, 4096,
										 true, true, false,
										 ((musb_ep->type ==
										   USB_ENDPOINT_XFER_ISOC)
										  ? 0 : 1),
										 musb_ep->
										 end_point.maxpacket);
					} else {
						_ex_mu3d_hal_insert_transfer_gpd(request->epnum,
										 USB_TX,
										 request->
										 request.dma,
										 request->
										 request.length,
										 true, true, false,
										 ((musb_ep->type ==
										   USB_ENDPOINT_XFER_ISOC)
										  ? 0 : 1),
										 musb_ep->
										 end_point.maxpacket);
					}

					/*Enable Tx_DMAREQEN */
					txcsr =
					    USB_ReadCsr32(U3D_TX1CSR0,
							  request->epnum) | TX_DMAREQEN;

					mb();	/* avoid context swtich */

					USB_WriteCsr32(U3D_TX1CSR0, request->epnum, txcsr);

				} else if (request->request.length == 0) {
					qmu_printk(K_DEBUG, "[TX] Send ZLP\n");
				}
			} else {
				qmu_printk(K_ERR, "[RX] %s, gpd=%p, epnum=%d, len=%d\n",
					   __func__, Rx_gpd_end[ep_num], ep_num,
					   request->request.length);
				if (is_len_err == true) {
					_ex_mu3d_hal_insert_transfer_gpd(request->epnum, USB_RX,
									 request->request.dma, 4096,
									 true, true, false,
									 (musb_ep->type ==
									  USB_ENDPOINT_XFER_ISOC ? 0
									  : 1),
									 musb_ep->
									 end_point.maxpacket);
				} else {
					_ex_mu3d_hal_insert_transfer_gpd(request->epnum, USB_RX,
									 request->request.dma,
									 request->request.length,
									 true, true, false,
									 (musb_ep->type ==
									  USB_ENDPOINT_XFER_ISOC ? 0
									  : 1),
									 musb_ep->
									 end_point.maxpacket);
				}
			}
		}
	}

	mu3d_hal_resume_qmu(ep_num, dir);
done:
	spin_unlock_irqrestore(&musb->lock, flags);
#endif
}

void qmu_exception_interrupt(struct musb *musb, unsigned int wQmuVal)
{
	u32 wErrVal;
	int i = (int)wQmuVal;

	if (wQmuVal & RXQ_CSERR_INT)
		qmu_printk(K_ERR, "==Rx %d checksum error==\n", i);

	if (wQmuVal & RXQ_LENERR_INT)
		qmu_printk(K_ERR, "==Rx %d length error==\n", i);

	if (wQmuVal & TXQ_CSERR_INT)
		qmu_printk(K_ERR, "==Tx %d checksum error==\n", i);

	if (wQmuVal & TXQ_LENERR_INT)
		qmu_printk(K_ERR, "==Tx %d length error==\n", i);

	if ((wQmuVal & RXQ_CSERR_INT) || (wQmuVal & RXQ_LENERR_INT)) {
		wErrVal = os_readl(U3D_RQERRIR0);
		qmu_printk(K_DEBUG, "Rx Queue error in QMU mode![0x%x]\r\n", (unsigned int)wErrVal);
		for (i = 1; i <= MAX_QMU_EP; i++) {
			if (wErrVal & QMU_RX_CS_ERR(i))
				qmu_printk(K_ERR, "Rx %d checksum error!\r\n", i);

			if (wErrVal & QMU_RX_LEN_ERR(i))
				qmu_printk(K_ERR, "RX EP%d Recv Length error\n", i);
		}
		os_writel(U3D_RQERRIR0, wErrVal);
		musb->error_wQmuVal = wQmuVal;
		musb->error_wErrVal = wErrVal;
		tasklet_schedule(&musb->error_recovery);
	}

	if (wQmuVal & RXQ_ZLPERR_INT) {
		wErrVal = os_readl(U3D_RQERRIR1);
		qmu_printk(K_DEBUG, "Rx Queue error in QMU mode![0x%x]\r\n", (unsigned int)wErrVal);
		for (i = 1; i <= MAX_QMU_EP; i++) {
			if (wErrVal & QMU_RX_ZLP_ERR(i)) {
				/*FIXME: should _NOT_ got this error. But now just accept. */
				qmu_printk(K_DEBUG, "RX EP%d Recv ZLP\n", i);
			}
		}
		os_writel(U3D_RQERRIR1, wErrVal);
	}

	if ((wQmuVal & TXQ_CSERR_INT) || (wQmuVal & TXQ_LENERR_INT)) {
		wErrVal = os_readl(U3D_TQERRIR0);
		qmu_printk(K_DEBUG, "Tx Queue error in QMU mode![0x%x]\r\n", (unsigned int)wErrVal);
		for (i = 1; i <= MAX_QMU_EP; i++) {
			if (wErrVal & QMU_TX_CS_ERR(i))
				qmu_printk(K_ERR, "Tx %d checksum error!\r\n", i);

			if (wErrVal & QMU_TX_LEN_ERR(i))
				qmu_printk(K_ERR, "Tx %d buffer length error!\r\n", i);
		}
		os_writel(U3D_TQERRIR0, wErrVal);
		musb->error_wQmuVal = wQmuVal;
		musb->error_wErrVal = wErrVal;
		tasklet_schedule(&musb->error_recovery);
	}

	if ((wQmuVal & RXQ_EMPTY_INT) || (wQmuVal & TXQ_EMPTY_INT)) {
		unsigned int wEmptyVal = os_readl(U3D_QEMIR);

		qmu_printk(K_DEBUG, "%s Empty in QMU mode![0x%x]\r\n",
			   (wQmuVal & TXQ_EMPTY_INT) ? "TX" : "RX", wEmptyVal);
		os_writel(U3D_QEMIR, wEmptyVal);
	}
}

#endif